975 stewart drive ? sunnyvale, ca 94o86 ? 4o8.737.8181 ? fax: 4o8.733.7645 ? www.metelics.com ? sales@metelics.com schottky diodes electrical specifications @ 25 c part package vbr ct vf rd number outline min. max. @1ma @10ma (v) (pf) typ max. @10ua @0v ohms smst3012 sot23-0,1,2,3,4 2.0 0.25 200C300mv 15 smst4012 sot23-0,1,2,3,4 2.0 0.25 380C480mv 15 smst6012 sot23-0,1,2,3,4 2.0 0.25 550C650mv 15 smst3004 sot23-0,1,2,3,4 2.0 0.60 200C300mv 10 smst4004 sot23-0,1,2,3,4 2.0 0.60 350C450mv 10 smst6004 sot23-0,1,2,3,4 2.0 0.60 520C620mv 10 smsd3012 sod323 2.0 0.25 200C300mv 15 smsd4012 sod323 2.0 0.25 380C480mv 15 smsd6012 sod323 2.0 0.25 550C650mv 15 smsd3004 sod323 2.0 0.60 200C300mv 10 smsd4004 sod323 2.0 0.60 350C450mv 10 smsd6004 sod323 2.0 0.60 520C620mv 10 features surface mount package tape and reel available reliability gold metallized chip silicon nitride/oxide passivation low series resistance low capacitance wide dynamic range specials are available upon request. description/applications these schottky diodes are specifically designed for commercial applications requiring devices in the sot23 or sod323 surface mount packages. the se- ries in low profile has options for bulk or tape and reel. this series offers a wide range of specifications and package configurations to give the designer wide flexibility. typical applications of these schottky diodes are up converters, down converters, mixers, detectors, phase detectors, pulse and amplitude modulators, and temperature compensation circuits. package terminal identification code surface mount sot23 and sod323 schottky mixers and detector diodes 3 12 sot23 single diode (-0) 3 12 sot23 series diodes (-2) 3 12 sot23 common cathode (-4) 2 1 sod323 3 12 sot23 single diode (-1) 3 12 sot23 dual anode (-5) 3 12 sot23 dual cathode (-6) 3 12 sot23 common anode (-3) sot143 split pair (-sp) sot143 anti-parallel (-ap)
a a 1 ? i c b d h e j f g maximum ratings operating/storage temperature range ... -65 c to +150 c max power dissipation (per package) ...................... 250mw measured in an infinite heat sink at t case =25 c). derate linearly to zero at 150 c. peak inverse voltage (p iv ) ................................... same as v br forward current (i f ) (1 s pulse) .................................... 1 amp package characteristics lead material .............................................................. alloy 42 lead finish .................................................... tin-lead, 60-40% maximum soldering temperature ................ 260 c for 5 sec. minimum lead strength ................................... 2 pounds pull typical package inductance .......................................... 2 nh typical package capacitance .... 0.10 pf (opposite leads) a a 1 ? i j e c f hg k sod323 package outline a e d g f h c b e28x package outline h f i g a b c d e i h f g a b e c d j sot23 package outline 0805 package outline 0.53 0.76 0.021 0.030 0.20 0.36 0.008 0.014 0.13 0.003 0.05 0.46 0.012 0.018 0.71 0.022 0.028 4.01 0.148 0.158 1.35 0.047 0.053 0.43 0.013 0.017 a b c d e f g h millimeters inches min max min max 0.08 0.30 0.56 3.76 1.19 0.33 2.92 0.109 0.115 0.15 0.002 0.006 i j 2.77 0.05 0.79 1.02 0.031 0.040 0.02 0.10 0.001 0.004 3.05 0.105 0.120 2.03 0.070 0.080 2.00 0.071 0.079 2.50 0.083 0.098 1.40 0.047 0.065 0.25 0.005 0.010 a a 1 b c d g h i millimeters inches min max min max 2.67 1.78 1.80 2.10 1.20 0.13 0.15 0.0035 0.0059 0.94 0.030 0.037 8.0 0.0 0.8 j e ? 0.89 0.77 0.0 0.54 0.015 0.021 f 0.38 0.79 1.02 0.031 0.040 0.02 0.10 0.001 0.004 3.05 0.105 0.120 2.00 0.071 0.079 0.54 0.010 0.021 2.50 0.083 0.098 1.40 0.047 0.055 0.25 0.005 0.010 a a 1 c e f g h i millimeters inches min max min max 2.67 1.80 0.38 2.10 1.20 0.13 0.15 0.0035 0.059 0.55 0.017 0.022 8.0 0.0 0.0 j k ? 0.089 0.44 0.0 1.14 1.40 0.045 0.055 1.91 2.16 0.075 0.085 0.84 0.025 0.033 0.63 0.015 0.025 a b c d millimeters inches min max min max 0.63 0.38 0.40 0.012 0.016 e 0.30 1.06 0.030 0.040 f 0.76 1.10 0.034 0.043 0.10 0.003 0.004 0.20 0.006 0.010 0.40 0.010 0.016 0.15 0.003 0.006 1.90 0.063 0.075 1.45 0.045 0.057 2.70 0.094 0.106 a b c d e f g h millimeters inches min max min max 0.25 0.08 1.60 1.15 2.30 0.63 0.76 0.025 0.030 0.20 0.38 0.008 0.015 0.20 0.004 0.008 0.76 0.020 0.030 0.50 0.010 0.020 4.52 0.162 0.178 2.41 0.085 0.095 1.27 0.040 0.050 a b c d e f g h millimeters inches min max min max 0.10 0.50 0.25 4.11 2.16 1.02 0.63 0.015 0.025 i 0.38 sot143 package outline e35sm package outline a c b d
|
